Sensormatic Dual UltraPosts Primary and Secondary (Refurbished)

All detection systems require a dedicated 120 VAC circuit, 3 wire, grounded, shielded, with 24 hour unswitched power and less than 0.5 VAC between neutral and ground. The dedicated outlet must be located 6" to 12" above the floor, with the circuit breaker labeled "EAS" at the panel. Dual pedestal systems sharing one power supply also require 3/4" metal conduit (EMT or rigid, no PVC) with a pull string, run under the floor, with pedestals set no more than 72" center to center. Dedicated electric must be installed to specification before system installation, or the warranty is void.